News

Latest News


  • BIO-SEA SALT

    AVAILABE IN: 25 US GALLON / 50 US GALLON / 150 US GALLON


    Product Features

    MEERSALTZ® Public Aquarium Maintenance Formula™ features a high-purity, quick-dissolving salt mix that contains all elements found in natural sea water.

    • Ozone safe formula for use with both marine and reef aquariums.
    • No nitrates, phosphates, silicates or heavy metals.
    • Rated 54 out of 100 with information from the S-15™ Report™. Used worldwide in public aqua displays
    • Made in tremendous quantities in the USA.

  • MARINE ENVIRONMENT SALT

    AVAILABE IN: 25 US GALLON / 50 US GALLON / 150 US GALLON


    Product Features

    MARINE ENVIRONMENT® The world's FIRST and ONLY REEF FORMULA. No nitrates, phosphates, silicates or heavy metals. Rated 100 out of 100 in the S-15™ Report™ MARINE ENVIRONMENT® dual phase formula™ Marine Environment® dual phase formula™ is a unique 2 Part Superior true reef aquarium marine salt.

    Marine Environment® dual phase formula ™ mixes quickly into an optically clear, pollutant free culture medium without residue. Part #1 is a homogenous blend of all of natures 78 elements, minerals & ions. Calcium, Magnesium, Alkalinity, Strontium and other select elements are elevated over NSW levels for proven beneficial results in the close marine system.

    As in the ocean, multiple forms of calcium, magnesium, potassium, sulfate, sodium, and other components are employed for vastly superior results. All major components are either USP or ACP™ grade ingredients. ACP™ grade ingredients are those manufactured specifically for Aqua Craft Products®. Marine Environment® dual phase formula™ as are all other Aqua Craft Products® marine salts the most consistently correct formulations available. Part #2 is a separate “Little Bottle that makes the Big Difference”™. The contents of the Little Bottle” includes Aqua Craft Products® supplementals: #6 Bio Elements™, #8 Iodide, #9 Strontium + Molybdenum™. #10 Sea Trace® & #11 Sea Safe®.

    Marine Environment® dual phase formula™ is available in 25 US gallon, 50 US gallon, 150 US gallon & 8000 US gallon sizes. Marine Environment® dual phase formula™ is an ACP™ Serie’ AA+™ formulation

    The Marine Environment® Little Bottle” is available as Marine Environment® Supplements™ in 16 ounce and 1 gallon sizes for those who wish to use a one-step salt.

  • CORAL MARINE SALT

    SOON WILL BE (AVAILABE IN: 25 US GALLON / 50 US GALLON / 150 US GALLON)


    Product Features

    CORAL MARINE® 50 Gallons BEST LOW COST MARINE SALT. No nitrates, phosphates, silicates or heavy metals.

    Rated 79 out of 100 with information from the S-15™ Report™. Instant Ocean®, Kent™ & Reef Crystals® scored 26 Coralife® scored 23 & Tropic Marin® scored 29 out of 100 possible.

Refractometer Laboratory Standard and the Refractometer Calibration Solution.

  • REFRACTOMETER LABORATORY STANDARD


    Product Features

    Auto Temperature Compensating. Deluxe laboratory standard, excellent construction with high quality optics and prism. The ultimate in specific gravity / salinity testing. Complete kit, with carrying case, pipette, adjusting tool, & cleaning cloth. Instructions included. Ready to use. 30 x 30 x 200 mm. Weight 121 grams.

  • REFRACTONMETER Calibration Solution


    Product Features

    Refractometer calibration solution is used to accutately cilbrate your refractometer for testing natural sea water or syntheic sea water.

    Buy more and save! Discount automatically applied at checkout:

    • 3-5 Units: 5% discount
    • 6-11 Units: 10% discount
    • 12+ Units: 15% discount

    ACP™ Refractometer Calibration Solution™ 2 Fluid ounces / 60 mL Specifically manufactured for calibrating refractometers for use in testing natural or synthetic sea water. Clean refratometer prism slide with clean fresh water. Dry completely with a soft clean cloth.

    Place a few drops of ACP™ Refractometer Calibration Solution on the prism slide. Allow 45 – 60 seconds if ATC (automatic temperature compensating) refractometer is used. Calibrate to 35 ppt.

    Clean refractomer prism slide with clean fresh water to remove RCS™ solution. Dry with a clean soft cloth so the prism slide is dry. Add a few drops of your aquarium water on the prism slide. Allow 45-60 seconds ATC refractometer is being used.

    Read the amount of dissolved salts in your aquarium water. Clean refractometer prism slide with clean fresh water after each use. For best results calibrate with RCS™ prior to each use. Note: Using RO or RO/DI water to calibrate a refractometer at -0- will yield inaccurate results when testing marine aquarium water in the 35 ppt. / SG 1.026 rangs.

Do It Yourself Products.

Liquid Assets

  • 1 Aqua Cal™ 16 oz.


    Product Features

    • 16 oz. for 2,500 gallons tank
    • 1 gal. for 20,000 gallons tank

    Multiple forms of bio active & bio available high purity calcium.

    Calcium is an essential major component / element / ion in natural sea water (NSW).

    Calcium is found at 400 parts per million (ppm) at 77F / 25C at a salinity of 35 parts per thousand (ppt) or a specific gravity of 1.026.

    Aqua Cal® is a unique blend of highly concentrated forms of pH balanced, bio-available™, and bio-active™ high purity calcium.

    Aqua Cal® replaces various essential forms of calcium that are consumed by captive marine life in their normal metabolic process.  Multiple forms of essential calcium are employed as they are found in NSW.

    Aqua Cal® is ideal to maintain and accelerate coral growth along with coloration and natural health.

    Maintain Ca at 400 ppm. for sea water duplication.  Ideal for marine fish and various sea plants and algae.

    Maintain Ca at 425-460 ppm. for reef aquariums.  Avoid adjusting calcium over 460 ppm.

    Prior to adding Aqua Cal®, test for alkalinity and magnesium.  When used with ACP™ #2 & #3 will maintain the critical balance with magnesium and carbonate hardness (alkalinity).

    Calcium should be in balance with: alkalinity (carbonate hardness), magnesium (Mg++), SO4-- (sulfate), K+ (potassium) and pH.

    Alkalinity must be between 6-9 or 2.14-3.21 meq/L. Magnesium must be between 1290-1350 ppm.  Test for other major ions and adjust if necessary only with ACP™ #4 and #5.

    Use periodic additions of ACP™ #6, #7, #8, #9 & #10 to maintain heavily stocked reef aquaria between routine water changes.  Use ACP™ #11, Sea Safe® when mixing new salt water.

    Aqua Cal® has no ammonia, phosphates, nitrites, nitrates, silicates, heavy metals or unwanted undesirable contaminates.

    Aqua Cal® is available in 16 ounce / 474 ml size that will treat 2500 US gallons / 2075 Imperial gallons / 9450 Liters of sea water.

    One cap (6 ml) will raise Ca 10 ppm.  In each 25 US gallons of marine aquarium water.

    Aqua Cal® is also available in 1 gallon size for treating 20,000 US gallons of marine aquarium water.

    Made exclusively with high purity (ACP Grade™) raw materials and ingredients.
    Made with the 13045 Process®.

  • 2 BUFFER + dKH Generator 16 oz


    Product Features

    • 16 oz. for 2,500 gallons tank
    • 1 gal. for 20,000 gallons tank

    Multiple forms of bio active & bio available high purity carbonates.

    Alkalinity or carbonate hardness is directly associated with the beneficial growth of all living corals.  It also plays an important role in maintaining proper pH in natural sea water (NSW).

    Alkalinity or carbonate hardness is found at 7.5 or 2.67 meq/L  at 77F / 25C at a salinity of 35 parts per thousand (ppt) or a specific gravity of 1.026 in NSW.

    Buffer + dKH Generator™ will automatically adjust marine aquarium water to the proper pH of 8.4 and increase alkalinity or carbonate hardness.

    Buffer + dKH Generator™ is a unique blend of highly concentrated multiple forms of pH balanced, bio-available™, bio-active™, high purity compounds.  Multiple forms of ingredients are employed as they found in NSW.

    Buffer + dKH Generator™ assists: Ca++, Mg++, K+, SO4—and other ions with the coloration and growth of corals, sponges, sea anemones, marine fish and captive marine organisms.

    ACP™ Buffer + dKH Generator® is the perfect one step pH adjuster and alkalinity builder.

    Maintain pH at 8.4 with alkalinity or KH (carbonate hardness) about 7.5-8  / 2.67-2.85 meq/L for sea water duplication.  Ideal for marine fish and various sea plants and algae.

    Maintain pH at 8.4 with an alkalinity or KH (carbonate hardness) about 8.4-9.5 or 3.-3.4 meq/L for reef aquariums.  Avoid adjusting alkalinity over KH over 10 / 3.6 meq/L.

    Prior to adding Buffer + dKH Generator™, test for calcium and magnesium.  Adjust with ACP™ #1 # # 3 if necessary.

    Calcium must be between 400-460 ppm. Magnesium must be between 1290-1350 ppm.

    Test for other major ions and adjust if necessary only with ACP™ #4 and #5.

    Use periodic additions of ACP™ #6, #7, #8, #9 & #10 to maintain heavily stocked reef aquaria between routine water changes.  Use ACP™ #11, Sea Safe® when mixing new salt water.

    Buffer + dKH Generator™ has no ammonia, phosphates, nitrites, nitrates, silicates, heavy metals or unwanted undesirable contaminates.

    Buffer + dKH Generator™ is available in 16 ounce / 474 ml size that will treat 2500 US gallons / 2075 Imperial gallons / 9450 Liters of sea water.

    Use one cap (6 ml) for each 25 US gallons of marine aquarium water.  Add enough to bring pH to 8.3-8.4.  Add more to adjust alkalinity or carbonate hardness to the recommend level.

    Buffer + dKH Generator™  is also available in 1 gallon size for treating 20,000 US gallons of marine aquarium water.

    Made exclusively with high purity (ACP Grade™) raw materials and ingredients.
    Made with the 13045 Process®.

  • 3 Magnesium 16 oz.


    Product Features

    • 16 oz. for 2,500 gallons tank
    • 1 gal. for 20,000 gallons tank

    Multiple forms of bio active & bio available high purity Magnesium.

    Magnesium is an essential major component / element / ion in natural sea water (NSW).

    Magnesium is found at about 1300 parts per million (ppm) at 77F / 25C at a salinity of 35 parts per thousand (ppt) or a specific gravity of 1.026.

    ACP™ Magnesium Mg++  is a unique blend of highly concentrated forms of pH balanced, bio-available™, and bio-active™ high purity magnesium.

    ACP™ Magnesium Mg++ replaces various essential forms of magnesium that are consumed by captive marine life in their normal metabolic process.  Multiple forms of essential magnesium are employed as they are found in NSW.

    ACP™ Magnesium Mg++  is ideal to maintain and accelerate coral growth along with coloration and natural health.

    ACP™ Magnesium Mg++ will not alter pH or alkalinity.  Mg++ maintains the critical SO4 + Cl balance.

    Maintain Mg++ at 1300 ppm. for sea water duplication.  This is ideal for marine fish and various sea plants and algae.

    Maintain Mg++ at 1300-1350 ppm. for reef aquariums.  Avoid adjusting magnesium over 1375 ppm.

    Magnesium should be in balance with: alkalinity (carbonate hardness), calcium (Ca++), SO4-- (sulfate), K+ (potassium) and pH.

    Prior to adding ACP™ Magnesium Mg++, test for calcium and alkalinity.  Adjust with ACP™ #1 # # 2 if necessary.

    Alkalinity must be between 6-9 or 2.14-3.21 meq/L. Calcium must be between 400-460 ppm..  Test for other major ions and adjust if necessary only with ACP™ #4 and #5.

    Use periodic additions of ACP™ #6, #7, #8, #9 & #10 to maintain heavily stocked reef aquaria between routine water changes.  Use ACP™ #11, Sea Safe™ when mixing new salt water.

    ACP™ Magnesium Mg++ has no, phosphates, nitrites, nitrates, silicates, heavy metals or unwanted undesirable contaminates.

    ACP™ Magnesium Mg++ is available in 16 ounce / 474 ml size that will treat 2500 US gallons / 2075 Imperial gallons / 9450 Liters of sea water.

    One cap (6 ml) will raise Mg++ 25 ppm. in each 25 US gallons of marine aquarium water.

    ACP™ Magnesium Mg++ is also available in 1 gallon size for treating 20,000 US gallons of marine aquarium water.

    Made exclusively with high purity (ACP Grade™) raw materials and ingredients.
    Made with the 13045 Process®.

  • 4 Sulfate 16 oz.


    Product Features

    Multiple forms of bio active & bio available high purity Sulfate.

    • 16 oz. for 2,500 gallons tank
    • 1 gal. for 20,000 gallons tank

    Sulfate is an essential major component / element / ion in natural sea water (NSW).

    Sulfate is found at about 2700 parts per million (ppm) at 77F / 25C at a salinity of 35 parts per thousand (ppt) or a specific gravity of 1.026.

    ACP™ Sulfate SO4--  is a unique blend of highly concentrated forms of pH balanced, bio-available™, and bio-active™ high purity sulfate.

    ACP™ Sulfate SO4-- replaces various essential forms of sulfate that are consumed by captive marine life in their normal metabolic process.  Multiple forms of essential sulfate are employed as they are found in NSW.

    ACP™ Sulfate SO4--  is ideal to maintain and accelerate coral growth along with coloration and natural health.

    Maintain So4-- at 2700 ppm. for sea water duplication.  This is ideal for marine fish and various sea plants and algae.

    Maintain SO4-- at 2750-2800 ppm. for reef aquariums.  Avoid adjusting magnesium over 3000  ppm.

    Sulfate should be in balance with:  alkalinity (carbonate hardness), calcium (Ca++), Mg++ (magnesium), K+ (potassium) and pH.

    Prior to adding Sulfate SO4--, test for calcium, alkalinity and magnesium  Adjust with ACP™ #1 # 2# ,3 if necessary.

    Alkalinity must be between 6-9 or 2.14-3.21 meq/L. Calcium must be between 400-460 ppm..  Magnesium must be between 133-1350 ppm.  Test for other major ions and adjust if necessary only with ACP™  #5.

    Use periodic additions of ACP™ #6, #7, #8, #9 & #10 to maintain heavily stocked reef aquaria between routine water changes.  Use ACP™ #11, Sea Safe® when mixing new salt water.

    ACP™ Sulfate SO4-- has no ammonia,  phosphates, nitrites, nitrates, silicates, heavy metals or unwanted undesirable contaminates.

    ACP™ Sulfate SO4-- is available in 16 ounce / 474 ml size that will treat 2500 US gallons / 2075 Imperial gallons / 9450 Liters of sea water.

    One cap (6 ml) will raise SO4-- 10 ppm. in each 25 US gallons of marine aquarium water.

    ACP™ Sulfate SO4--  is also available in 1 gallon size for treating 20,000 US gallons of marine aquarium water.

  • 5 Potassium 16 oz.


    Product Features

    Multiple forms of bio active & bio available high purity Potassium.

    • 16 oz. for 2,500 gallons tank
    • 1 gal. for 20,000 gallons tank

    Potassium is an essential major component / element / ion in natural sea water (NSW).

    Potassium is found at about 390 parts per million (ppm) at 77F / 25C at a salinity of 35 parts per thousand (ppt) or a specific gravity of 1.026.

    ACP™ Potassium K+ is a unique blend of highly concentrated forms of pH balanced, bio-available™, and bio-active™ high purity potassium.

    ACP™ Potassium K+ replaces various essential forms of potassium that are consumed by captive marine life in their normal metabolic process.  Multiple forms of essential potassium are employed as they are found in NSW.

    ACP™ Potassium K+ is ideal to maintain and accelerate coral growth along with coloration and natural health.

    Maintain ACP™ K+ at 390 ppm. for sea water duplication.  This is ideal for marine fish and various sea plants and algae.

    Maintain K+ at 405 ppm. for reef aquariums.  Avoid adjusting potassium over 430  ppm.

    Potassium should be in balance with: alkalinity (carbonate hardness), calcium (Ca++), magnesium Mg++, Sulfate (SO4-) and pH.

    Prior to adding ACP™ K+ Potassium, test for calcium, alkalinity, magnesium and sulfate.  Adjust with ACP™ #1 # 2#, #3, #4 if necessary.

    Alkalinity must be between 6-9 or 2.14-3.21 meq/L. Calcium must be between 400-460 ppm..  Magnesium must be between 133-1350 ppm.  Test for other major ions and adjust if necessary only with ACP™  #4.

    Use periodic additions of ACP™ #6, #7, #8, #9 & #10 to maintain heavily stocked reef aquaria between routine water changes.  Use ACP™ #11, Sea Safe® when mixing new salt water.

    ACP™ Potassium K+ has no ammonia,  phosphates, nitrites, nitrates, silicates, heavy metals or unwanted undesirable contaminates.

    ACP™ Potassium K+ is available in 16 ounce / 474 ml size that will treat 2500 US gallons / 2075 Imperial gallons / 9450 Liters of sea water.

    One cap (6 ml) will raise K+ 10 ppm. in each 25 US gallons of marine aquarium water.

    ACP™ Potassium K+ is also available in 1 gallon size for treating 20,000 US gallons of marine aquarium water.

  • 6 BIO-Elements™ 16 oz.


    Product Features

    Multiple forms of bio active & bio available essential elements

    • 16 oz. for 2,500 gallons tank
    • 1 gal. for 20,000 gallons tank

    ACP™ Bio Elements™ are essential minor components / elements / ions in natural sea water (NSW).

    ACP™ Bio Elements™ is a special concentrated formulation of important minor elements found in natural sea water (NSW).  All ions are pH balanced, bio-available™, bio-active™ and high purity.

    ACP™ Bio Elements™ replaces elements metabolized by the aquarium bio system and utilized by captive marine organisms.

    ACP™ Bio Elements™ is the adieal additive that will support and assist the closed biological filtration system, plus accelerate the growth and coloration of coral.

    Bio Elements™ will not alter pH.

    ACP™ Bio Elements™ should be used wen mixing all one step marine salts and on a regular basis between routine water changes.

    ACP™ Bio Elements should be in balance with: alkalinity (carbonate hardness), calcium (Ca++), Mg++ (magnesium), Sulfate (SO4-) and pH.

    Prior to adding Bio Elements™, test for calcium, alkalinity, magnesium, sulfate & potassium.  Adjust with ACP™ #1 # 2# ,#3, #4, #5 if necessary.

    Alkalinity must be between 6-9 or 2.14-3.21 meq/L. Calcium must be between 400-460 ppm..  Magnesium must be between 133-1350 ppm.  Test for other major ions and adjust if necessary only with ACP™  #4.

    Use periodic additions of ACP™  #7, #8, #9 & #10 to maintain heavily stocked reef aquaria between routine water changes.  Use ACP™ #11, Sea Safe® when mixing new salt water.

    ACP™  Bio Elements™-- has no ammonia,  phosphates, nitrites, nitrates, silicates, heavy metals or unwanted undesirable contaminates.

    ACP™  Bio Elements-- is available in 16 ounce / 474 ml size that will treat 2500 US gallons / 2075 Imperial gallons / 9450 Liters of sea water.

    One cap (6 ml) of ACP™ Bio Elements™ for each 25 US gallons of marine aquarium water.

    ACP™ Bio Elements™--  is also available in 1 gallon size for treating 20,000 US gallons of marine aquarium water.

  • 7 Bromide 16 oz.


    Product Features

    Multiple forms of bio active & bio available high purity Bromide

    • 16 oz. for 2,500 gallons tank
    • 1 gal. for 20,000 gallons tank

    Bromide/Bromine is an essential minor component / element / ion in natural sea water (NSW).

    Bromide is found at about 65 parts per million (ppm) at 77F / 25C at a salinity of 35 parts per thousand (ppt) or a specific gravity of 1.026.

    Research has demonstrated that sufficient levels of Br- must be present in order for Iodide to be metabolized by captive marine organisms.

    Bromide is found at 10%-35% of NSW water levels in some low priced marine salts.  Therefore it is essential to fortify or supplement some brands of marine salts with Br-.

    ACP™  Bromide Br-  is a unique blend of highly concentrated forms of pH balanced, bio-available™, and bio-active™ high purity bromide/bromine.

    ACP™ Bromide Br- replaces various essential forms of bromide/bromine that are consumed by captive marine life in their normal metabolic process.  Multiple forms of essential Br- are employed as they are found in NSW.

    ACP™ Bromide Br-  is ideal to fortify low end marine salts with this essential minor ion.

    Maintain Br- at 65 ppm. for sea water duplication.  This is ideal for marine fish and various sea plants and algae.

    Maintain Br- at 70-75 ppm. for reef aquariums.  Avoid adjusting magnesium over 80 ppm.

    Br- should be in balance with: alkalinity (carbonate hardness), calcium (Ca++), magnesium (Mg++), sulfate (SO4)--, K+ (potassium) and pH.

    Prior to adding Br-, test for calcium, magnesium and alkalinity.  Adjust with ACP™ #1 # # 2 & #3 if necessary.

    Alkalinity must be between 6-9 or 2.14-3.21 meq/L. Calcium must be between 400-460 ppm..  Magnesium must be between 1290-1350 ppm.  Test for other major ions and adjust if necessary only with ACP™ #4 and #5.

    Use periodic additions of ACP™ #6, #8, #9 & #10 to maintain heavily stocked reef aquaria between routine water changes.  Use ACP™ #11, Sea Safe® when mixing new salt water.

    ACP™ Bromide Br- has no, phosphates, nitrites, nitrates, silicates, heavy metals or unwanted undesirable contaminates.

    ACP™  Bromide Br- is available in 16 ounce / 474 ml size that will treat 2500 US gallons / 2075 Imperial gallons / 9450 Liters of sea water.

    One cap (6 ml) will raise Br- 10 ppm. in each 25 US gallons of marine aquarium water.

    ACP™ Br- is also available in 1 gallon size for treating 20,000 US gallons of marine aquarium water.

  • 8 Iodide 16 oz.


    Product Features

    Multiple forms of bio active & bio available high purity Iodide

    • 16 oz. for 2,500 gallons tank
    • 1 gal. for 20,000 gallons tank

    ACP™ Iodide is essential minor component / element / ion in natural sea water (NSW).

    ACP™ Iodide replaces coral metabolized iodide and safe guards against possible goiter symptoms exhibited by long term captive marine fish.

    ACP™ Iodide is an easy to use and ideal additive that will replace iodide metabolized by corals.  Maintaining proper levels of Br- (#7) and Iodide (#8) can safe guard against possible goiter systems exhibited by long term captive marine fish.

    ACP™  Iodide will not alter pH.

    ACP™ Iodide should be used when mixing all one step marine salts and on a regular basis between routine water changes.

    ACP™ Iodide should be in balance with: alkalinity (carbonate hardness), calcium (Ca++), Mg++ (magnesium), Sulfate (SO4-) and pH.

    Prior to adding ACP™ Iodide test for calcium, alkalinity, magnesium, sulfate & potassium.  Adjust with ACP™ #1 # 2# ,#3, #4, #5 if necessary.

    Alkalinity must be between 6-9 or 2.14-3.21 meq/L. Calcium must be between 400-460 ppm..  Magnesium must be between 1300-1350 ppm.  Test for other major ions and adjust if necessary only with ACP™  #4.

    Use periodic additions of ACP™  #7, #9 & #10 to maintain heavily stocked reef aquaria between routine water changes.  Use ACP™ #11, Sea Safe® when mixing new salt water.

    ACP™  Iodide-- has no ammonia,  phosphates, nitrites, nitrates, silicates, heavy metals or unwanted undesirable contaminates.

    ACP™  Iodide-- is available in 16 ounce / 474 ml size that will treat 2500 US gallons / 2075 Imperial gallons / 9450 Liters of sea water.

    One cap (6 ml) of ACP™ Iodide will raise iodide 0.004 ppm for each 25 US gallons of marine aquarium water.

    ACP™ Iodide  is also available in 1 gallon size for treating 20,000 US gallons of marine aquarium water.

  • 9 Sr & Mo™ 16 oz.


    Product Features

    Multiple forms of bio active & bio available strontium & molybdate.

    • 16 oz. for 2,500 gallons tank
    • 1 gal. for 20,000 gallons tank

    Strontium & Molybdenum are essential minor components / elements/ ion in natural sea water (NSW).  Sr. is found at about 8 ppm. in NSW.

    Strontium (Sr) has a natural interaction with calcium.  Molybdenum, along with other minor elements plays an important role with the stability of close marine systems via natural nitrification.

    ACP™ Sr & Mo™  is a unique blend of concentrated pH balanced, bio-available™, and bio-active™ high purity forms of these essential elements.

    ACP™ Sr + Mo™  replaces various essential forms of both of these ions that are consumed by captive marine life in their normal metabolic process.  Multiple forms of essentials are employed as they are found in NSW.

    ACP™ Sr + Mo™ is a professionally formulated marine aquarium supplement that naturally balances both Sr & Mo.

    ACP™ Sr + Mo will not alter pH.  It does not contain ammonia, phosphates, silicate, nitrite, nitrate, heavy metals or undesirable contaminants.

    Prior to adding ACP™ Sr + Mo™ check for the proper levels of calcium, alkalinity and magnesium.  Adjust if necessary only with ACP™ #1, #2, #3.

    Maintain ACP™ Sr + Mo™ at 7.5-8. ppm. for marine fish aquariums.  Adjust to 9.5-10 ppm. for reef aquariums.  Avoid adjusting Sr. to over 13 ppm.  Molybdenum will automatically be balanced.

    Alkalinity must be between 6-9 or 2.14-3.21 meq/L. Calcium must be between 400-450 ppm.  Magnesium must be between 1290-1350 ppm.  Test for other major ions and adjust if necessary only with ACP™ #4 and #5.

    Use periodic additions of ACP™ #6, #7, #8 & #10 to maintain heavily stocked reef aquaria between routine water changes.  Use ACP™ #11, Sea Safe® when mixing new salt water.

    ACP™ Sr & Mo™ is available in 16 ounce / 474 ml size that will treat 2500 US gallons / 2075 Imperial gallons / 9450 Liters of sea water.

    One cap (6 ml) will raise Sr. 5 ppm. in each 25 US gallons of marine aquarium water.

    Aqua Cal® is also available in 1 gallon size for treating 20,000 US gallons of marine aquarium water.

  • 10 SEA TRACE™ 16 oz.


    Product Features

    ALL IN ONE. Reduces stress, maintains natural slime coat.

    • 16 oz. for 2,500 gallons tank
    • 1 gal. for 20,000 gallons tank

    Trace Elements are essential for everything living.  There are 70 trace elements found in natural sea water (NSW).

    Sea Trace® is a special All-In-One (A-B-C) blend of all of the elements found in virgin sea water.  All ions are pH balanced, high purity, bio-available™ and bio-active™.

    Sea Trace® replaces the essential trace ions metabolized by captive marine organisms, used by the aquariums biological filter and removed through various forms of chemical filtration and waste organic removal via protein skimmers.

    Sea Trace® is the perfect supplement to promote captive marine animal care and maintain coral health.

    Sea Trace® will not alter pH.

    No ammonia, phosphates, nitrates, nitrates, undesirable contaminates.

    Sea Trace® should be used when mixing all one step marine salts and on a regular basis between routine water changes.

    Prior to adding Sea Trace®, test for calcium, alkalinity, magnesium, sulfate & potassium.  Adjust with ACP™ #1 # 2# ,#3, #4, #5 if necessary.

    Alkalinity must be between 6-9 or 2.14-3.21 meq/L. Calcium must be between 400-460 ppm..  Magnesium must be between 1300-1350 ppm.  Test for other major ions and adjust if necessary only with ACP™ items.

    Use periodic additions of ACP™  #7, #8, #9 to maintain heavily stocked reef aquaria between routine water changes.  Use ACP™ #11, Sea Safe® when mixing new salt water.

    Sea Trace® is available in 16 ounce / 474 ml size that will treat 2500 US gallons / 2075 Imperial gallons / 9450 Liters of sea water.

    One cap (6 ml) of Sea Trace® for each 25 US gallons of marine aquarium water.

    Sea Trace®  is also available in 1 gallon size for treating 20,000 US gallons of marine aquarium water.

  • 11 SEA SAFE™ 16 oz.


    Product Features

    ALL IN ONE. Reduces stress, maintains natural slime coat.

    • 16 oz. for 2,500 gallons tank
    • 1 gal. for 20,000 gallons tank

    SEA SAFE®

    Sea Safe® is a special “All-In;One” multipurpose marine aquarium water conditioner.

    All components are pH balanced, bio-active™, bio-available™, and high purity.

    Sea Safe™ adds protective colloids and electrolytes thus allowing newly mixed salt water safe for the introduction of marine life.

    Sea Safe®shouljd be used when making new salt water with all one step marine salts.  Ideal for use during transportation and acclimation of all forms of sea lift.

    Sea Safe® reduces stress when acclimating or shipping marine animals by assisting in  maintaining their natural protective slime coat.

    Sea Safe® will not alter pH.

    Prior to the use of Sea Safe®, or any other additive, test for calcium, alkalinity, magnesium.  Adjust with ACP™ #1, #2, #3 if necessary.

    Use periodic additions of ACP™  #7, #8, #9, #10 to maintain heavily stocked reef aquaria between routine water changes.  Use ACP™ #11, Sea Safe® when mixing new salt water.

    Sea Safe® is available in 16 ounce / 474 ml size that will treat 2500 US gallons / 2075 Imperial gallons / 9450 Liters of sea water.

    One cap (6 ml) of Sea Safe® for each 25 US gallons of marine aquarium water.

    Discontinue protein skimming for 2 days after the addition of Sea Safe®.

    Sea Safe®  is also available in 1 gallon size for treating 20,000 US gallons of marine aquarium water.

  • 12 MARINE Prolong™ 16 oz.


    Product Features

    pH+ Trace Element replenisher, ALL IN ONE.

    • 16 oz. for 2,500 gallons tank
    • 1 gal. for 20,000 gallons tank

    Marine Prolong™

    ACP™ Marine Prolong™ is a combination pH adjuster/alkalinity booster/trace element replenisher.

    Scientific research has demonstrated when pH declines there is a reduction of carbonate hardness and certain essential trace ions are no longer present at useable levels or values.

    Marine Prolong™ is a simple, easy to use one step additive that will boost alkalinity, adjust pH, and replenish essential trace elements.

    Marine Prolong™ helps safeguard all marine fish and reef invertebrates against possible disease due to low pH and ionic deficiencies.

    Prior to the use of Marine Prolong™, or any other additive, test for calcium, alkalinity, magnesium.  Adjust with ACP™ #1, #2, #3 if necessary.

    Use periodic additions of ACP™  #7, #8, #9, #10, #11 to maintain heavily stocked reef aquaria between routine water changes.  Use ACP™ #11, Sea Safe® when mixing new salt water.

    Marine Prolong™ is available in 16 ounce / 474 ml size that will treat 2500 US gallons / 2075 Imperial gallons / 9450 Liters of sea water.

    One cap (6 ml) of Marine Prolong™ will raise pH .2 in each 25 US gallons / 94.5 L / 20.8 imperial gallons of marine aquarium water.

    Avoid adjusting pH more than 0.4 in 24 hours.

    Marine Prolong™  is also available in 1 gallon size for treating 20,000 US gallons of marine aquarium water.